|
No
Repainting
Avoid the costly preparation required for adhesive vinyl graphics
by eliminating the need to repaint areas prior to installing graphics.
Saves Time: up to 10 hours
Saves You:$1,400 - $2,000
No
Graphics To Remove
FleetFrame™ displays tension over existing graphics eliminating
the extensive and time consuming removal process.
Saves Time: up to 10 hours
Saves You: $1,000 - $1,750
No
Damage To Repair
FleetFrame™
installs over old graphics, damaged truck sides and peeling paint,
concealing the unsightly damage behind our FleetFrame™ displays.
Saves Time: many hours
Saves You: $250 - $2,500
Benefits
Markets you
24/7
Increases product awareness
Raises quality level of product
Draws attention
Vibrant / Radiant Images
Types
of Fleet Graphics
Small cars
Delivery Trucks
Semi-Trucks
Bus Wraps
Airplanes
Delivery Vehicles
Printer Device
HP
Inkjet Prints
Graphtec Vinyl Cutter
Scitex XL Jet
|
|
|
|
Fleet
Graphics using FleetFrame- The Fast, cost effective system for Truck-Side
Graphics! Much more cost effective than Billboards and Bus Wraps.
Get 40 times the value of other outdoor advertising mediums using
FleetFrame. For about the price of one bus wrap or one billboard
you can advertise your targeted message on 40 truck sides! |
|
|
|
Cleaner,
Undistorted Images
Transform old, dirty, corrugated trailers into dynamic, clean,
smooth-sided moving billboards.
Saves Time: 3-5 hours
Saves You: $1,500 - $3,000
Painless
Change-outs
Quick and easy. Display can be changed out in under 30 minutes.
Saves Time: 15-20 hours
Saves You: $2,500 - $4,500
Easy
Installation
On-site installation in most weather conditions. Average installation
time of system and display is 1-2 hours.
Saves Time: 6-10 hours
Saves You: $1,000 - $1,750
Durability
Guaranteed
FleetFrame™ Systems are backed by a limited lifetime warranty.
Durable FleetFrame™ displays are guaranteed for up to five
years.
|
|
|
Cost
comparison Framing system vs. Adhesive vinyl for fleet advertising
Faster Better and Cheaper
Benefits of FleetFrame system:
1. Initial application of frame and graphics are
less expensive than adhesive vinyl.
2. Frame is a one-time purchase. Fleet graphics that attach to
our frame are non-adhesive vinyl flex that is much less expensive
than adhesive as a substrate but just as durable. Once the framing
system is installed subsequent printing and installation of graphics
will provide dramatic cost savings to fleet owner. Installation
is achieved in minutes versus hours.
3. Fleet graphics removed from a frame system can be reused.
4. Because graphics installed with the framing system are slightly
raised from the truck surface they can make a damaged or unsightly
trailers look new. Rivets, graffiti, old paint, adhesives or graphics
from previous applications as well as dents and scrapes are completely
hidden by the system.
5. There is no permanent damage to the trailer. Pop rivets are
used to attach the frame to the trailer and then poprivets replace
the holes made in the trailer if the frame is ever remove.
6. Cost effectiveness of system permits much more frequent changes
and updating of graphics for truck fleet. This permits the fleet
owner to seek coop advertising $.
7. Permits fleet owner to sell truck-side advertising to third
party partners.
Cons
of using Adhesive vinyls for fleet graphics:
1. Fleet graphics printed on adhesive vinyl as substrate are expensive
2. Fleet graphics printed on adhesive vinyl are very expensive
to apply new graphics and remove old graphics (versus frame system).
Because installation is so time consuming it takes trucks out
of service for many hours ata time.
3. Substrate adhesive vinyl is a one-time use item. Once you install
it you cannot reuse the material for another truck.
4. Adhesive vinyl shows rivets and dents in vehicle.
5. Adhesives can damage vehicle by leaving glues and pealing paint
when removed.
6. Expense of installation and removal makes frequent change-outs
an expensive business decision.
7. Too expensive
for third party advertising.
|
|
|
